Antonio
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Antonio
-
-
Hi,
I try to make a call from the PLC using GPRS and modem Cinterion EHS6T. I successfully prepare the PLC-side modem but when I Start the Call from the PLC it constantly gives me Modem Timeout.
-
Hi there,
I try to initialize Enfora modem PC-side. I followed all of the steps from the tutorials on the Internet. I tried different Baudrates, tried Hyperterminal... When I use Baudrate of 9600, and the AT commands defined in the Modem Services, all of the commands are successfully completed and when it comes to the end it always says: Modem could not be initialized.
Do you have any advice what can be the problem?
Modem Timeout error
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Thanks for the response.
My signal quality is 21. I forwarded a port and successfully accessed it via telnet, but it still gives me the same error when i try to call from the PLC. Do you have any other suggestions?