Ayoub
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Ayoub
-
-
Hello,I work with the SM-J-T20 PLC, and I measure with an electronic card the voltage on an analog input (0-10V) of my PLC. the problem is there are a parasites which causes a quick variation of the value read by the PLC, I already tried to solve this problem by the analog filter, but nothing has changed. Can you helps me please ?
Thank you in advance. -
-
Hello ,
I want to add in the alarm history a fault when One power up and power off the PLC . in the power up of the PLC I used the SB2 and it worked. but in the power off I do not know how to do it, I tried to use even SB2 by reversing the contact but it always gives me the startup time and is not the one of the power off.
-
Thank you sir,
So we can just change the size of the font, we can not modify the size of the interface? because the minimum size is 8 which was not enough for some texts -
Hello,
I use Samba 43 and I change the language of the built-in alarms displays texts , so I had a problem with the size of texts that I translated, I want to know if I can put the display alarms in full screen in order to those texts be suitable with the display alarms?
-
Hello
I use Samba 4.3 and I want to use the alarms for an application, and I saw how it works in the help, I understood the alarms display functioning, but there is not a good explanation of their application. If you can give me an example of the alarms application?
thank you in advance -
Thank you very much, Sir, you have helped me a lot, just one thing I want to understand the logic of the positioning of the point, for example, if I want to display X, XX or XX, X how this logic works
-
-
Hello,
it's my first time working with Visilogic and I do not know how to display a float number with a precision of 2 digits after the decimal point. I have already found that this question has been asked by someone else who has been advised to use ASCII to Num, I tried to do it but I did not get there. can you help me, please ? and thank you in advance
Analog filter
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
thank you for your answers, I uesed the filtration via ladder, and it worked