[SD card manager can't convert trend to excel]

Hello, i am trying to convert the trend data to excel file but I get error as in the attached image. What could be the problem?

[M90 table values]

Dear Sir, please help. I have a M90 controller and need to create a "spreadsheet" in the controller. The table should be able to enter up to 10 values that the operator would enter. When these values are entered, it is necessary to press one value at a time and place it in some temporary memory.
 

[Recipe table]

test.vlp

[Recipe table]

Ok, but can you make simple example?

[Recipe table]

I looked, but I did not manage to solve the problem. I use samba SM70-J-T20.

 

I want connect data table "recipe" with HMI, and change parameters in table. 

 

For example:

For example, the "recipe" table has 3 columns and 100 rows. Columns are: Number of tools, name and time of blowing. It is necessary that when the operator selects on HMI the number of tools (for example 2), then the name and time of blowing for this tool is saved and the values are saved. When choosing, for example, the tool 50 does the same.

[Recipe table]

Hello, I'm trying to make a recipes for a plastic machine. Different tools should be used to differentiate the name of the tool and the different blowing times. Paramtre name and time of blowing is entered by the operator on the HMI. Can someone help me connect the screen to the table.

A simple program would be welcome.

Thank in advance

[HSC encoder position]

I'm honored to use the incremental encoder 500imp/rev. I need to display the exact position on the screen. How I can calculate a position, since sharing with a comma is not possible. For 500 imp I have 37.68mm. 

Measuring range is from 0-1100mm, with a precision of 0.1mm

 

I use jazz T20HS
 

Sorry for my bad English.