-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by berkaykaya
-
-
Hello everyone!
My question is how i can import h&w config my project?
I use SM70,i have already export .ulri file on my old project,but i cant find any import selection on my new visilogic project...
Thank you for everything! ❤️
-
Hi Paul,
First you must know Inverter Manual for Modbus Comminications Params. (Baud rate,data bits.. etc.) After you must make configurations with visilogic,you must set R.H.R for read freq,amper etc. You must set registers Inverter at your program.
-
I add first scan display codes at your program.
This codes make every first scan load -Main Display-
I think when you look codes you will understand "what i wanna do"
Have a nice day!
-
Can you send your program?
-
Firstly,thank you for your reply and your time..
You are right i must make a space MI's.
This week im out the office,when i back the office i will try your soluitons.
Thank you Joe..
-
I attached what i mean;
First Column:Alarm Number
Column 1:Alarm Date
Column 2:Alarm Clock
Column 3:Alarm Type
-
Yes,i set-reset manual in Online Mode and I did all the steps in sequence and i set delimiters like a picture.
Finally i think we made it! (TEST32)
But there are small problems...
If you can look (TEST33),there are problems going to the bottom line.
-
Thanks for your reply.
I fix MI62 mistake,@Ausman right;
18 hours ago, Ausman said:MI62 twice...looking at other parts of the program perhaps one of these should be MI6?
I attached last test mail,if i use the delimiters "2C" it continues to write to the same column in excel as it should pass to the column.
-
Thank you very much for your time.
I fixed my mistakes and I'll try again.
I'il write the results.If you change the delimiter to <<, it continues to write to the same column in excel as it should pass to the column.
Sometimes it should pass to the bottom line, but not going the bottom line.
It is very sad that there is no clear explanation for this.
I can say that I have tried every way in the figures mentioned in the documents.Sorry for my language.
Respect for you,Berkay
-
You dont need MB 3,
Set VFD params 19200 Baud,8 data,None Parity,1 Stop.
PLC must be a master for control VFD.Dont use "SCAN_EX".
You must set a "Write-Read" networks.İF PLC writing cant read same time.Mr. Joe right,first you must read VFD actual freq. and you must use "Modbus = Read Holding Register" , keep in mind PLC cannot write simultaneously while reading.
When you wanna write freq. VFD you must use "Modbus = Preset Holding Register".
For Read-Writing addresses you must look manual of VFD,and sometimes we may need to make parameter settings via the drive.
In communication parameters, the driver requests a Modbus address assignment.
It's really enjoyable, but it's a tough subject.
It's a good idea to go step by step. -
I cant find our last .csv file but i attached same .csv file.
We try everything but we cant find our solution.
Sir,i dont understand what you mean.We looking with mail inbox or SD Card Suit "Data Table Editor" but they are same mixed view.
-
We keep trying.
We will provide positive or negative information.
-
Is there anyone can help?
-
-
Hi everyone,
We want to report the data records that we keep daily via e-mail at the end of the day. We have implemented the shipment with the help of examples but we have problems sending the data records in the form of an excel report.
Columns and rows are interfering.Thanks for yours support ...
Import H&W Config with .ulri file
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
++