[EXF-RC15]

On 7/13/2018 at 5:00 AM, Nikolay Kovalev said:

Dear all,

Could you please give explanation of one question: how can i use EXF-RC15? 

I should connect this module directly to PLC Vision via Canbus? 

Can I use a several EXF-RC15 modules with one Vision via Canbus?

Thank you in advance!

Nikolay.

 

 

Hi Nikolay,

How did it  go with your application?

I am going to start a application with the next equipment:

EX-A2X

IO-R016

EXF-RC15

V350-J-TRA22

Please you can share your experience with me. I have not found the document explaining how to communicate EXF-RC15 and V350-J-TRA22.

Thanks in adavance

 

[Configuration]

12 minutes ago, Ausman said:

The battery advice is just that...advice.  You are essentially starting a totally different project with the RC15...all it does is communicate it's results to the plc.....ie you can't add the RC15 into a project that already has a plc. You really need to look at all the material I suggested above and this will guide you.  Please do this and then work on starting your programs. 

cheers,

Aus

Very kind thank you I will be doing.

[Configuration]

6 minutes ago, Ausman said:

It looks like we have had a time overlap during me writing my last response, which probably answers your question above.

cheers,  Aus 

Yes it was like this, You help me with some doubts and I appreciate the suggestions regarding cable and connections, but I am at a stage before,  the error I have is when I try to replicate the project, starting from the beginning, I try to create the project and configure the order that they are physically connected and I get the error that I already mentioned. 

Thanks Aus

[Configuration]

20 hours ago, Ausman said:

I'm assuming that you have tried to do Connection/Upload?   "Upload" in Unitronics terms is receive the file from the PLC. 

If the PLC's file has been programmed into the PLC in certain ways you can retrieve it.  It depends on the initial method of writing the file into the PLC...which Unitronics call Download.

I suggest you try an upload as it could help you along your desired path if you can get the current program and parameters out of the plc.  It will be a good starting point for further discussion on the forum.

cheers,

Aus

I can not get the backup, this option was not enabled when it was downloaded.

My main question is: it is possible that in a single project there are all the components mentioned above, I am confused because the module EXF-RC15 works as PLC or it is only a remote I/O module, I need to take the first step to configure the project, to be able to see the remote inputs and manipulate outputs.

Thanks Ausman

[Configuration]

I can not get the backup, this option was not enabled when it was downloaded

[Configuration]

Hi everyone

it is the first time that I work with Unitronics, I am trying to finish a project that someone else started, this person left installed and configured the project even 3 motors already work, the problem is that there are 3 more missing, but I do not have the PLC project, I need to configure and program this from the beginning, that is why I am writing to you.

The hardware is the next.

V350-J-TRA22

EX-A2X   Expansion adapter

IO-R016

EXF-RC15 High speed i/o

When I tryed configured the project and i started with V350-J-TRA22, later module IO-R016 later EXF-RC15 it showed me the next message

"There is no battery backup for the operands when the EXF-RC15 is selected on the HW."

I have added 4 images, configuration 1 and configuration 2, is the way I have tried to create my project, the other projects1 and project1b is how they are physically connected

Thanks in advace