[V1210-BacNet gateway comms issue]

Does anyone have experience with the BacNet gateway? I can't seem to establish a Modbus session from my V1210.

PLC is connecting on port 502, socket 2(Client/Master) to the gateway's port 502, socket 9(Server/Slave).

I've done a packet trace and found a Modbus/TCP error 'Cannot classify packet type'

Attached is the tcpDump, Modbus comms config in visilogic, and gateway config file. Someone, please help!!!

Thank you in advance

 

tcpDump.pcap Modbus_BacNet.vlp Synthex BacNet Gateway Config.csv

[Communication over TCP/IP could not be established]

Hello,

I also have an ethernet comms issue. I can enter an IP address of 192.168.1.4 in info mode. My project settings are 192.168.1.4. My card init parameters are 192.168.1.4. However, when power is cycled on the plc the ip address defaults to 127.0.0.1. Any ideas as to why this would be happening?

Regards,

jfinn

[Vision 1210 default ip on power cycle]

Hello,

I have a V1210 which defaults to 127.0.0.1 ip address on power cycle. The project settings ip is 192.168.1.4 and the ip in the card init block is 192.168.1.4. I've tried downloading using serial connection to make the parameters stick, but nothing seems to work. Anyone have ideas?

Regards,

Justin