BrayanContreras
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by BrayanContreras
-
-
Good morning, at this moment I have this connection problem and I would like to know how you solved it if possible, I appreciate the collaboration that you can give me.
The plc that I am working with is a V350-J-R34. I worked it on my pc without problems but I had to change computers and I could not establish a connection again.
The connection was made usb-usb V3 I download the software version 9.8.91, install the usb driver version and check the com port, the baud rate is working at 115200, however it does not connect.
Error 207
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Yes. Every time I connect the plc I check the COM port and assign it, the problem is that it is set to a specific one, regardless of changing the physical port, the COM assigned is the same for each USB port.
I knew that the COM entries were free, that no device was using them.
I don't know if it is a problem in the control side, the connection is simple, however I have had problems