Raul95

Is it possible to simulate the program without connecting it physically to the plc ? Thank you everyone for the help, I really appreciate it.

Hello again, I did managed to look trough some projects but none of them have any analog output, I did some research and I noticed that in other software there is used SCALE_ X "Scale" and NORM_X "Normalize" in ladder for output analog. In unilogic software I can not see any of them tools, could you please tell me which tool I should be using instead ?

The files which I downloaded are ''.ulpr''. But they seem to be ''read only''

HI ORSO2001, I did downloaded the examples projects but it won't let me open them, as it comes up with an error ''read only''. I did managed to figure out the hardware configuration and to create the HMI screen, but I am not sure what tools to use for the ladder programming, as I do not have any inputs. I know that I have to use linearize tool for converting the numbers to a percentage, but I do not quite know what other tools I need to allow me to change the percentage of an analogue output from the screen. Thank you, Raul

Hello, I am looking to use Unistream 7'' (Combined Plc & Hmi) + USC-P-B10 UNISTREAM CPU + 2x UN-UIA-0006 , as for my project, I would like to control the speed of 10 motors which are driven by individual inverters on voltage from 0 to 5V. So the 2x UN-UIA-0006 Analogue output modules would give me the number of analogue outputs that I need. The stop and start of the motors are controlled from a different control unit, so I am hoping to be able to adjust the speed only of all motors from the same screen. I am looking for some guidance as I have absolutely no experience with Plc's. I did download the software but I do not really know where should I start. Thank you, Raul