[V120, On-line connection with Ethernet to RS232 converter]

Thank you very much for the good feedback. 🤗
This gives me quite a bit to work with.
Will return with a follow-up

Happy New Year

VisiLogic Version

[V120, On-line connection with Ethernet to RS232 converter]

Maybe this is my problem.
In Visilogic, there is always a modem running on Com1,
when I hang up, the modem stops for a very short time, but automatic dial again?
I cannot stop the modem nor edit the data?
Which connection does Visilogic use?, Serial or Modem?
This doesn't really make any sense

[V120, On-line connection with Ethernet to RS232 converter]

1 hour ago, Flex727 said:

All of the serial port parameters can be set on the V120 PLC within INFO Mode. It's a bit cumbersome, but it's all there.

Thanks, found it, but it didn´t do the trick 😞

[V120, On-line connection with Ethernet to RS232 converter]

Hi
I have an old V120-22-R1
I want to connect to it using an  Ethernet to RS232 converter,  I use a GNOME232 https://en.papouch.com/gnome232-ethernet-to-rs232-converter-p4615/
The Ethernet RS232 port is setup with Lantronix driver software, no problem to find the converter on my network
I use Windows 10 pro (VM ware)
Hardware setup is PC->Network-> GNOME232 -> Original Unitronics RS232 cable -> V120
I have used the cable directly from a PC COM port a couple of years ago

I have search the net for the RS232 setup for the V120, but the only thing I can find is the Baud Rate, is there no setup for  Data bits, Parity, Stop bits & Flow control?