kringh

Thank you!Then I will do that.

I do have the program, but it is another guy that made the program, and I dont' know if he would like me to do post it on the open forum, and he is not reachable.

Thank you for all help! I don't know how to program the PLC, and I was hoping there was some kind of default port connections. I understand now that this have to be configured in the PLC. I also tought that when I disconnected the Remote Operator from the PLC I could connect the Ignition to the same ip and port as R.O was using(20256). I am sorry if I am asking dumb questions. I will read the links provided. Thank you!

Hi. I have connected Citect Scada through ip 10.20.52.21 port 502, and Remote Operator through ip 10.20.52.21 port 20256. Both these work fine at the same time. I would like to test Ignition Scada, but I dont want to diconnect the Citect until I get the Ignition fully up and running since the Citect is collecting historical data that I dont want to loose. When I diconnect the Remote Operator I can connect the Ignition Scada through 10.20.52.21 port 20256 and the Ignition confirms that it has connected. The tags updates fine when connected through 502 port, but when using the 20256 port the tags just shows error. Do anybody know if it is possible to connect two Scada sytem at the same time to Unitronics V570?

I have posted picture of the rungs as I am not sure if the programmer would like me to post it. I will try to get in contact with him. I am glad for help.

Thank you for help! I tried the search function as you sgguested, and I pasted a screenshot of the result. As I am afraid of "regret" if I change something wrong in the project, I pasted a screenshot of the page you refered to. Do you think the edits are done some other plases than this since it has the numbers in it already?? The language is Norwegian. Here are a little translations: Dødbånd = deadband, Nivå inntak = level water intake dam, Effekt = realtime power from generator, Pulslengde = pulslenght of the electric motor which regulates needle for water into hydro generator, Innenfor = within, Dyse = nozzle, settpunkt inntak = setpoint intake. Do you think I can do changes and download it to the plc while running, or do I have to "download all & burn"?

Hello. I have a micro hydro power generator which is contorolled by Unitronics V570 and programmed with Visilogic 9.6. I cannot ask the programmer so I hope someone in this forum can help me. My problem is that this Visilogic project is made for a bigger hydro power generator, so there is a deadband setting in the program that is set to 3kw of deadband, and that is too much for my little generator. The deadband is in use when the generator output is regulated with P.I.D control and regulating according to water level in the water intake dam at the top. I want to be able to set the deadband to 1 kw. In the HMI there is a value of 3 kw, and i can cahange the value in the HMI, but when i push the save button it moves back to the value of 3 kw. I cannot find any place in the ladder code where to find and edit that deadband. I have found the address(MI697), but I dont have the knowledge to find out how to do this. Does anyone have a idea how to find this out? Best regard Kris