VladF

Installing new version onto W-11 Home one Language. Installing itself is OK. After start - error (hiding behind the main banner). After "OK" - "Loading Components..." for a few seconds and ... That's all. Nothing start program. Installing into VM W-10 is OK.

UniLogic 1.32.98, 1.33.236, 1.33.373 - no one version works on "W-11 Home one Language" - after installing and start the program: "Loading Components..." for hours. Now I am working under virtual machine W-10.

Image-1: a part of screen without buttons after the "Sync". Image-2: the same part in usial state, with all buttons. Image-3: the problem "3" with support service number UNI-82953 (downloading corrected programm - a few minets of black screen - and this message on the screen of the panel). The problem is resolved by the button "Download" in "PLC" without "Sync", but there is a risk of the "problem-3". I will try to use UniLogic 1.34 in a few weaks on the next object. It is very dangerous to update the system in work by online.

1. Before "Sync" there were pictures, after Sync - there are no them, only holes of the background. Only texts remained. All pictures have been taken from the same folder on PC. 2. Corrected the program. Downloaded it. The screen is black. VNC screen was connected - also is black. Program in PLC works without any problem. Online - is working properly. New downloading - no any information about downloading on screen: it is black. After downloading - screen is black. I did not find any way to switch the HMI on again - only rebut, but it is impossible for continuous process. 3. Look at picture (UNI-82953). 4. Of course, 15" screen has a lot of elements. Some of screens have almost max number of elements. 5. Where can I find a detailed description of All points of the top ribbon (Menu)? Description of the "Development mode" functions? 6. I am working only in Ladder. Without any "C" or "ST". Another question: is it possible to adjust and monitor the program in Online for C or ST? Is it possible to use Ladder and ST inside one function (in the different NW, like for Siemens)?

Hi! Questions about 1.34.192: 1. Have been fixed the buttons disappearing after Sync in Quick Sync Mode? 2. Is it possible in new version to turn on the screen again, when it turned off after loading some chenges by pressing a Download button, without the rebooting: the screen is off, PLC and Online are in work, but it is absolutely impossible to manage by a continuous process that must not be stopped. 3. Were you able to cope with the shutdown of HMI at 100% CPU load (and this is in a cycle time of 5ms and without any restrictions on its increase!)? 4. Has the very long waiting time of screens switching after pressing a button been eliminated (sometimes much more than 5s)? 5. Is Quick Sync Mode switching on during online mode still made after rechecks, already made in going to online and it takes the same very much time? 6. Will the pressing of "Sync" in Quick Sync Mode be guaranteed to change the program in PLC in accordance with PC programm? Or sometimes, after downloading and entering in Online, PLC will continue to work according to the old program, and only after Online OFF/ON it will report that the changes have not been loaded?