![](http://content.invisioncic.com/r129856/set_resources_2/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Jeferson
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Jeferson
-
-
28 minutes ago, Joe Tauser said:
Yes, it is possible to do datalogging over wifi, but I wouldn't use the serial converter you called out as those types of devices typically need a driver on a PC somewhere to make them work.
Put an Ethernet card in the V1040.
I couldn't find anything on a Rish LM-12360. Please post a link to a manual on it if you want us to be helpful.
Joe T.
Hi Joe thanks for your help.
I did put an Ethernet card in the V1040.
For the first step in point A, I don't know how are the necessary parameters, which I have to set in the program for the PLC. I have found an information for visilogic to set up a remote access, but it is not clear. Can you help me with this.
I need the serial converter because the V 1040 implementation is 200 meters away from the PC for the scada system.
I have attached some pdfs with the information of the components I have, and the link of the visilogic configuration.
https://www.i4automation.co.uk/unitronicspdf/VisiLogic - Utilities.pdf
rishabh_lm1360_datasheet.pdf rishabh_lm1360_operating_manual.pdf [User-Manual]USR-W630-User-Manual-V1.0.3_1687230152.pdf USR-W630-AT-commands-V1.0.3.pdf
-
Hello I am a beginner in the application and use of unitronic components :
1. I need to use the vision 1040 as a PLC+HMI controller in a point A, this to register some variables and control some actuators, while the vision 1040 is working I need to send all the information about the variables with the USR-W630, as wifi signal to the point B, in the point B I receive the information and send it to the scada system with the Rish LM-12360.
Is it possible to do this application, with these components.
I hope someone can help me.
Greetings from colombia
Vision 1040 + USR-W630 to USR-W630 + Rish LM-12360
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Hello Gabriel and Joe thank you for your help.
I have looking for more information about the application, then I made a diagram as Gabriel comments that it is possible, with wifi converters, I will send the data from the PLC to the scada system, but this information how it is sent from point A to point B, via TCP/IP or I have to convert to ASCII or bynari.
I already set up a tcp/ip communication, in the PLC.