Ferdi Laban

Dear all who helped me, For now I gave up trying to get the right hardware configuration. My customer is looking for a new installation and does not want to spend any more time in the old one for the time being. If he changes his mind and I might give it a try, I will reply on this subject. For now I want to thank everyone who tried to help me. Ferdi

Hi Joe, I run the programm with a batch file under Windows Xp. I will discuss with my customer what he wants. With increase with one you mean the hardware code?. But I haven't no documentation about the M228 about the slots. Do you have a manual and can you send it to me? So I can understand how the slots are counted and what should be filled in.

Hi Joe, The support of Unitronics come back with the answer that they aren't able to help me and suggest to try it on this forum. I hope that I get the answers through this forum. Ferdi

Hi Joe, The application is a palletizer. I don't have the specs of the card and which values need to be added. I will ask this again to the support. But I haven't had any reaction on my mail after sunday. An upload of the configuration isn't possible. I can only view, configure or download. I hope somebody can give me the information what I need to add for the card. I think I sended the wrong PLC.CFG file, but I have it on the PC which I use for this project. Do you think with the changes for the base rack it is enough? For the slot I also don't know what I should enter and where I should enter the value of the extra card. Ferdi

Hi Joe, I think with your suggestion everything looks fine. I don't know exactly what the values should be of the slots. Can you take al look to the foto and my configuration? Slot 00 gives a value what isn't oke in my opinion (this was allready shown when I opened the project with this sofware version). But may be you can give me the answer. (I have selected of course my added PLC) Then we have a card M210-12-R2. This is for the communication with the M90 CANBus. I don't know if this is in slot 00 or slot 01. I can't select this card only M210-12-R1 or R4. So I expect that I need also the PLC.CFG for this card. But also here I haven't information to what I should change it or if I can insert the needed card in the row between the 2 versions.... The PLC.CFG file I have also attached. I hope you can help me. Ferdi PLC.CFG

Hi Aus, Thank you for your reply. I have tried and I can add the PLC in the file, it's visible but now I need the right information for in this configuration file. I hope somebody can give a reply with the specifications of the M228-12-B5. I have attached what I now have added. But this need to be changed to the right values. I have added line 201 to 207 and changed line 164 the value from 4 to 5

Hi Joe, I have got the software allready from the support, but the version they have sended has the problem I described. I have asked if they have a solution for this problem but they replied with "The Minicon products family is obsolete for more than 10 years, I cannot provide you the requested support." I hope somebody has a solution how to solve my the problem.

Dear all, Who can help me to get the right software for configuring and download the hardware configuration for the M228-12-B5F. I have version 3.03, but I can't select this type only M228-12-B1 to 4. I hope somebody can help me. Thank you in advance.