bettim
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by bettim
-
-
Hello to All,
I need to drive stepper motor for one little machine, but before tacking controller
want to know if anyone has tried to drive stepper motor with JZ10-11-PT15.
With what frequency work well.
For me is enough 10-15Khz,(In the manual maximal freq.is 0.5khz for pnp and 32khz for npn)
Baho
-
Hi,Joe T.
I made program for encoder it is working,right rotation count up left rotation count down but ,
reading speed is very small.
If you have solution for Jazz plc send me. (I need to connect encoder with 500 imp/rot in Jazz plc)
Regards
-
Hi,Emil
Yes, but Jazz plc have two high speed inputs, If I use like counter input is working well with high speed
I will tray sometime and forget it.
-
Thank you, Emil
I made program “U90Ladder” to use two inputs of Jazz like A&B signals but rotating speed must be small and encoder with small number imp/rot.
-
Hi all,
I need to connect Incremental Shaft Encoder at JAZZ plc
Can anybody help me to use two HSI inputs at JAZZ like M90, Shaft Encoder
Best Regards
Drive stepper motor with JZ10-11-PT15
in Jazz, M91 PLCs and U90Ladder
Posted
Hi,
Thank you
I understood, I need to write more then 20Net in Ladder (configured PWM,enable output, linearization acceleration/deceleration ..)
But it is project for one or two little machines.
I wanted to know if I can start the project with jazz or should necessarily pass to other PLC.
(JAZZ is simple and cheap )
Regards,
BAHO