Brianmac Posted April 27, 2018 Report Share Posted April 27, 2018 PLC: V1210, Hardware: A, OS v3.4, Boot Ver: 2.2(11), BinLib v0-3.10(03), Factory boot: 1.3(07) Win10 connecting works fine, android - sometimes, IOS - never. all are connecting through VPN. do get a message: unitronics operand start address and end address must be non-negative and less than the operand count on the PLC Any help would be appreciated! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.