NY_programguy

Thank you!

Hello, Is there a way to do multi-line text label in a button text? Maybe I'm missing something! Thanks.

Thank you. I was under the impression that since this was on the Unitronics website, that it was heavily monitored by the company. I will call in with any urgent questions. Thanks again for your assistance.

This post answers one of my questions but how can I set limits so the HMI entry can only be from 5-30? Or am I better off doing a "data entry box" where I can have limits built in?

Hello, Wondering if I can change the 0-8191 scaling in the analog input setup to whatever I need? 0-1000 for a 0-1000psi pressure sensor? Can i use a numeric data entry block to directly load a PID setpoint into the PID.Setpoint data type? Also- Is there a counter function in the logic or do you have to create your own? Thank you!

Thank you for the reply. A few more questions: Is there a counter function? I am going to need to develop a run timer for a pump and was just going to increment a counter based on a timer. Can I configure my analog scaling right in the properties window for the individual input? Can i move a setpoint from the HMI screen directly into the PID setpoint?

Hello all, I'm working on my 1st UniLogic program. I have years experience with AB, Red Lion and some Siemens. This is a new beast to me. How can I do the following: Make a circle? Multistate image? Group graphics? This is going to be a learning curve! Thanks for any replies.