Jump to content
ahoover

Issue with TON timer

Recommended Posts

Has anybody else had issues with TON timers??

Several times I have seen where the timer seems to get stuck with the "out" bit ON.  It's a very simple logic where the timers out bit is used as a N/C bit to activate the timer, thus the timer is constantly cycling.  I have seen where the out bit goes high & stays high until I "Reset Retained Tags" in UniApps.  This may have occurred after a new application was downloaded to the UniStream.

I'm using latest version of UniLogic & have all OS files up to date on the UniStream.
 

Thanks,
Ahoover

Share this post


Link to post
Share on other sites

Eyal Koren,

 

At the time of this issue I had been in contact with support & they looked at the logic.  After tinkering with the issue for a while we found that resetting the retained tags takes care of it.

 

Since support had never heard of this issue previously, I thought I would post on here to see if anybody else ever saw this problem.

 

Thanks,  ahoover

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×