Sarkis Sarkissian Posted July 9, 2019 Report Share Posted July 9, 2019 Hello, I have a JZ20-J-UA24. I'm reading temperatures by means of a thermocouple, and I want to record those temperatures on EXCEL, is there a way to do that through U90 Ladder? Quote Link to comment Share on other sites More sharing options...
AlexUT Posted July 9, 2019 Report Share Posted July 9, 2019 Hi Sarkis, Look at U90Ladder examples: C:\Program Files (x86)\Unitronics\Unitronics U90 Ladder\Examples\Communication\ Printing data.U90 Send string with STX and ETX.U90 Use serial port at PC to collect data. B.R. Quote Link to comment Share on other sites More sharing options...
Sarkis Sarkissian Posted July 9, 2019 Author Report Share Posted July 9, 2019 I didnt get how it worked, I'm sorry i'm a bit new to u90 ladder, so can you give me a detailed help on to how to do it. I just want the values to be written in an excel spreadsheet Quote Link to comment Share on other sites More sharing options...
AlexUT Posted July 10, 2019 Report Share Posted July 10, 2019 Sarkis, You can download and test DataXport https://unitronicsplc.com/software-visilogic-for-programmable-controllers/ https://unitronicsplc.com/Download/SoftwareUtilities/DataXport_3_1_23.exe Install it, define communication channel and it will request information from JZ20 and save it as Excel spreadsheet at each preset time interval. B.R. Quote Link to comment Share on other sites More sharing options...
Sarkis Sarkissian Posted July 10, 2019 Author Report Share Posted July 10, 2019 I downloaded it, and its still not working. It is basically not reading the PLC. I have it connected by means to a USB to the PC. I tried to connect by all possible ports, and still it was working. Its just the below analog inputs I want to write them on excel. Is there any easier way to do that please? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.