Mike

I want to note that should be allowed to "Untrusted applications" in your Google-account security settings. About problem: I also could not send any attachment. Emails without attachments goes normally. Can you give an example? Unilogic V1.17.58

Mny tnx dr Guru ! Just now I will download and try.. ----------------------------------------- Yes! All OK after upgrading PLC and I/O units.

I try to sniff any outcoming data from RS232 (UAC-02RS2) Ports to modem.. during initialization of modem.. And I do not see anything ! help help help Configuration with USB-COM converter working properly. I sniff "at" line during of initialization. Modem working without problem.

Thanks, Reuven, Everything is clear about memory. That's why I wanted to move into the project at least screens without touching the ladder.

Hello Reuven! Now add to ladder of V350 project the big address operand MB6000, for example.. And try to import-export screen to SM35.

When I do import screen of V350 to Samba SM35, the following error .. Even if there are no variables on the screen. HELP!

I'm using the V350-TU24 for PWM control of a powerful chopper. Since the controller uses RC-circuit, is not possible to get the output high frequency and sharp edges. I had to climb inside) and found the magic point. The result is a control on the chopper frequency of 8 kHz (via optocoupler..). But there is a downside - only 32 steps adjustment duty cycle. And by the way, HS input is also modified to measure frequencies up to 100 kHz.

Thanks. Not so all is terrible ). Through resistor 5.1Meg current flows only 100 uA max. I also forgot to mention that all the analog inputs were engaged, so I had to use a thermocouple input.

One day I had the need to measure the high voltage using the controller V350-35. And he came to such a strange decision. Accuracy, of course, is not high - a few volts. But in this case was sufficient.

The font is ok. I mean, placing "stickers" inside the rung of the ladder. it's just my wish to improve the interface.

Do, please, the element of the ladder "comment". For accommodation close to the other elements. A line of text between the ladder rungs are not always comfortable ..

But in a table of several thousand values! I plan to use the linearization. Substituting the values X1Y1 and X2Y2 for each whole mV.

I want to connect a thermocouple type A, which is not in the configuration settings. How can make this easier? Piecewise-linear function with a table?