[Sending attachments via email]

I want to note that should be allowed to "Untrusted applications" in your Google-account security settings.

 

About problem:

I also could not send any attachment. Emails without attachments goes normally.

Can you give an example?

Unilogic V1.17.58

[GSM modem not work via RS232 Communication Module]

Mny tnx dr Guru !

Just now I will download and try..

 -----------------------------------------

Yes!

All OK  after upgrading PLC and I/O units.

[GSM modem not work via RS232 Communication Module]

I try to sniff any outcoming data from RS232 (UAC-02RS2) Ports to modem.. during initialization of modem..

And I do not see anything !

 

help

help

help

 

Configuration with USB-COM converter working properly. I sniff "at" line during of initialization. Modem working without problem.

[Import Screen V350 to Samba]

Thanks, Reuven,

Everything is clear about memory. That's why I wanted to move into the project at least  screens   without touching the ladder.

[Import Screen V350 to Samba]

Hello Reuven!

Now add to _ladd^er of V350 project the big address operand MB6000, for example..  And try to import-export screen to SM35.

[Import Screen V350 to Samba]

When I do import screen of V350 to Samba SM35, the following error ..

Even if there are no variables on the screen.

HELP!

 

[Speed Up PWM]

I'm using the V350-TU24 for PWM control of a powerful chopper. Since the controller uses RC-circuit, is not possible to get the output high frequency and sharp edges. I had to climb inside) and found the magic point.

The result is a control on the chopper frequency of 8 kHz (via optocoupler..). But there is a downside - only 32 steps adjustment duty cycle.

And by the way, HS input is also modified to measure frequencies up to 100 kHz.

[High Voltage measuring]

Thanks. Not so all is terrible ). Through resistor 5.1Meg current flows only 100 uA max.

I also forgot to mention that all the analog inputs were engaged, so I had to use a thermocouple input.

[High Voltage measuring]

One day I had the need to measure the high voltage using the controller V350-35. And he came to such a strange decision.

Accuracy, of course, is not high - a few volts. But in this case was sufficient.

[Comment]

The font is ok. I mean, placing "stickers" inside the rung of the ladder.

it's just my wish to improve the interface.

[Comment]

Do, please, the element of the ladder "comment". For accommodation close to the other elements.

A line of text between the ladder rungs are not always comfortable ..

[thermocouple type A]

But in a table of several thousand values! I plan to use the linearization. Substituting the values X1Y1 and X2Y2 for each whole mV.

[thermocouple type A]

I want to connect a thermocouple type A, which is not in the configuration settings. How can make this easier? Piecewise-linear function with a table?

[colorize my life !]

Goal - improving the aestetic perception of the invironment and quality of programming.

I do not know any other IDE, in which at least the color of the general background should not be changed.

Happy holidays!

[colorize my life !]

I   so need  to  change  colors  of  ladders background ..  (different color of every net)

I  so need  to set  colors every comment..

Help me! Give me paints ! 

[Protocol Scan FB]

Another quest about Protocol :

I'm using V350-TU24 and want to receive message like " >1[CR] "   after request  (Send " &321[cr] ")  via Port2  RS485.

STX and ETX  of Scan   sets  for   3E  (i.e.">")  and   0D  ([cr]).  Pattern message=  "1"

When I send legal message from the hex terminal  "  3E 31 0D  "  , V350 recognizes this message as alien -   Index= -1 ,  Session complete=0

When I add at begin "0D",  and send  "  0D 3E 31 0D  "  ,  all working properly.   But why this 0D ?!

! if I try to turn off the step Send request,  it works without  0D ..  and with 0D..  But the efect on the "Number recieved bytes" ..

Serial monitor of the V350 info mode displays everything correctly.

Visilogic 8.6.1.  OS of V350 updated.

HELP