Kycayca
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Kycayca
-
-
Please help newbie!My objective: to make the remote reading of water meters and electricity to a building using vision 230.I wrote a small program to play with the meter and understand how everything works. But suddenly confronted with problem! The reading data from meter are not displayed. And I can not understand where i made a mistake.Maybe there is a similar project example or someone can check my programm.My meter telegramm:68|29|29|68|08|00|72|64|78|13|04|01|6A|01|02|00|00|00|00|86|1083|00|00|00|00|00|00|00|86|20|8300|80|67|D8|08|00|00|02|FF|92|00|1E|00|C8|16Primary m-bus address: 00Thanks a lot!
Visio 230 programm issue
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Flat Cold Hot
01 115.258 0.000
02 59.079 49.297
03 235.354 0.000
04 0.000 0.000
05 153.646 90.032
Tthis zero is not correct data reading.
if you need additional info please ask!
program is attached.
16.vlp