You are going to want to set the IP in the CARD INT to unique and available IP. The first 3 octets are going to be the same as you PC/router but the last number needs to be unique.
If the IP for your computer for example was 192.5.5.40, you would need the CARD INT IP to start with "192.5.5.". In command prompt use can use "ping" to check if a particular IP is in use.
Hope that helps!
can anybody help i am having a problem with the socket connect on a 570 i have initialised the tcp/ip card and initialised the socket.
I am connecting to a Lan router which has internet connection, i have set the subnet mask to 255.255.255.0,the ip is set to the ip of the router in the tcp/ip card init. What do i set the default gateway to???
The socket initialisation is set to the master with a port number of 20256 protocol tcp.
When i set the socket connect idont get a connection according to SB 147, i have set the socket connect with the ip of my outgoing mailserver and port 25.
socket connect problem V570
in Vision & Samba PLC + HMI Controllers & VisiLogic Software
Posted
Hi Andy,
You are going to want to set the IP in the CARD INT to unique and available IP. The first 3 octets are going to be the same as you PC/router but the last number needs to be unique.
If the IP for your computer for example was 192.5.5.40, you would need the CARD INT IP to start with "192.5.5.". In command prompt use can use "ping" to check if a particular IP is in use.
Hope that helps!