Gugulanov
-
Posts
34 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Everything posted by Gugulanov
-
Today I made ugrade to Unilogic 1.13.9 and firmware 1.13.5. I'll check these days if the same error will appear again.
-
OS: 1.12.20 Firmware: 1.12.7
-
Hi all, Advise me for the following issue: - I have a working application, in which after adding a numeric box or meter on HMI display, compiling and downloading is OK, but after download, appears "HMI internal error". - Rebooting doesn't help. - When removing the added element and downloading the application the error dissapears. The HMI display have about a 75 objects in it. Is there some limitations of number of HMI objects and variables? Regards, Plamen Gugulanov
-
Hi, Sorry for late reply, I didn't manage to get the things running on XP, so I install Windows 7 and everything is fine Regards
-
Hi all, I recieve a strange error log after compiling a simple project in Unilogic 1.12.20. See attached file. I'm running Unilogic on fresh install of Windows XP SP3. Any suggestions? Regards, P. Gugulanov
-
Hello, Finally, I managed to deal with this problem. Initially I tried one 8GB usb stick, and then one 4GB stick - negative result. After that, I split the 4GB stick in two partitions. The size of partition that worked for me after several trials is approx. 1.5GB and FAT32 file system. Regards, Plamen Gugulanov
-
Hi all, Same problem with me. Panel is USP-104-B10 - we have 2 pieces of them - usb stick is not reckognized, and I can't transfer firmware files.
-
Hi. Aham, okay. Meanwhile, i did it in a similar way, that you suggest. I used "Folder report" function with a counter.... Thanks for answer. Regards
-
Hi there, I'm using V1040 with SD card, on which i'm storing .udt files. I want to use SI64 as reference for changing the current sub DT(1-4) folder when it is full. In the ladder application i'm using SB341 as condition for storing SI64 in a MI, but as result SI64 give me the remaining files in main DT folder, not in current sub DT folder (1-4), which i'm using. Did anyone faced the same problem? Regards
