[Communication with Vision via Ethernet]

@Flex727, @Ausman, thank you for your support! Now it's clear! 

[Communication with Vision via Ethernet]

I think the problem with cable. I use  direct Ethernet cable.

Should I make any settings on the PC? How to check that "PC is on the same subnet as the PLC IP address"?

Thanks!

 

 

[Communication with Vision via Ethernet]

Dear all,

Please help me to understand one question: could we connect to Vision directly (without Ethernet-hub) via Ethernet-cable and Upload/Download the PLC project?

I try to connect with V350 (+Ethernet card).

I could'n find the explanation of this topic in Vision Help

Thanks!

 

BR

Nikolay.

 

[EXF-RC15]

On 7/14/2018 at 7:59 AM, Joe Tauser said:

You didn't say what you wanted to do with the EXF-RC15, but check out the examples in Help->Examples->Version 900->Project Examples->Communications->EXF-RC15.

Yes, you connect it to the Vision with CANbus but keep in mind that the EXF-RC15 is actually a small PLC in itself.  CANbus is just used for data transfer between the module/PLC and the Vision.

You can have up to 64 nodes in a CANbus network.  I think this covers your requirement for "several".

Joe T.

Thanks! Now its clear!

[EXF-RC15]

Dear all,

Could you please give explanation of one question: how can i use EXF-RC15? 

I should connect this module directly to PLC Vision via Canbus? 

Can I use a several EXF-RC15 modules with one Vision via Canbus?

Thank you in advance!

Nikolay.