Antal

Hi I need help. Thanks in advance. B.A.

Problem solved! There was a problem with our DNS server. Greetings. B.A.

Yes time/date is correct. The problem is the same after Off / On . PLC starts with the same date / time. I tried programming from another pc but it stays that way.

Hi I need help solve this problem. Unitronics UniLogic I use a program, Ver 1.30 .58 PLC USC-B10-B1 & USC-B5-B1, UIS-WCB1 & UID-0808R, The PLC is not older than 30 days. The battery is good in both. Foil removed. Phe problem is the following. Sets the time and date for this after each programming. She does so from the first day. I set manual the clock date everything is fine. Or Unistream managment / Set RTC everything is fine. I upload the new program again it resets to what is in the picture. When I turn it off and turn it on the is the same error. Please help solve this error. Thank you in advance for your help. Greetings. B.A.

Hi UniStream website operates on the internal network. VNC also works. MQTT also works, I can communicate with it. The Website I can't find anywhere a description of how to use an external network. You could help with that. I have a fixed IP address. I want to use mobile and tablet. Greetings B.A

Hi Thank you for your answer. I tried this but it doesn't work. Please help so we can solve it. Could you give me a solution to this. Thanks in advance for the answer. Greetings B.A

Hi How many items can be maximum in one Rung? Input conditions. Thanks in advance for the answer. B.A.

Thank you for your answer. Thanks for the advice. I wanted to solve the hysteresis by adding and subtraction. I am very beginner in PLC programming. This is my 4th day in PLC programming. So far I have only written programs for microcontrollers. Greetings B.A

Hi Simon I solved it that there would be no hysteresis. It works well. There is a simple solution? Thanks in advance for the answer. Greetings B.A

Thanks for the reply, it's so very simple and it works. We always do the complicated solution first .

I'm very new, this is my first project. It is a physical push button connected to a digital input.

Hi. Single Push Button On/Off. I did this project with a 2-sec timer. Good solution? I look forward to your opinions. Greetings B.A

Hi, It's my fault, I installed the program on the D:/driver. And here I was looking for the. D:/...Data\UniPics , so I couldn't find it. Thank you for your help. Greetings B.A

Hi all. I'm looking but I can't find the images anywhere. According to document they are here but I do not find. Please help. Thanks in advance. Greetings B.A

Thank you for your answer. I took it back to the dealer, got another one. It works well.

Hi all I'm new to the forum. This is the mistake. Orange blink Red On OS/Application error No USB communication. How to solve this problem. Thanks for the help.