Hello Everyone,
I had problems using V700 - V200-18-E46B. The terms of use and the errors I encountered are as follows:
There are 7 contactors 230V AC in the system panel. 4 units of 5.5kW and 3 units of 7.5 kW.
1.jpg;
O.S. (Stop Mode - Fatal Error)
Enum: 0x00000801
IP: 0x00344704 00344566
Ldr: 0x000000F7
Desc: Illegal Word Operand Access
2.jpg;
O.S. (Stop Mode - Fatal Error)
Enum: 0x00000801
IP: 0x00340B00 00343B06
Ldr: 0x0000001B
Desc: Undefined Opcode
3.jpg;
O.S. (Stop Mode - Fatal Error)
Enum: 0x00000801
IP: 0x000F3FFF 00353B92
Ldr: 0x00000015
Desc: Illegal Instruction Access
By performing a reset of the equipment, the problem is solved momentarily. However, this is an undesirable situation as it poses a risk for our production.