Moran
-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Posts posted by Moran
-
-
Hi,
I have a button on the HMI that doing some actions, I want to press this button from the ladder code, how can i address that button?
there is no a link bit like visilogic. Can I address HMI element by using it's name?
thanks,
Moran
-
hi joe,
i need to monitor the frequency and amplitude, can i use digital input? and maybe convert the 0V -3.3V square wave to open gnd and display this on trend graph?
-
hello,
i need to monitor a square wave of 3V amplitude and 190 Hz.
can i display this signal on HMI trend graph? what extantion do i need ? analog input ?
i am using V570.
thanks.
-
hello,
i need to measure a sin signal 40MHz freq and 3V.
i wand to show this signal on the PLC screen and i need the PLC to monitor this signal and in case of the signal disappear to print a FAIL massage.
1. can i measure this frequency?
2. should i use trends?
i am using the V570 PLC.
some help will be appreciated.
thanks.
-
hi,
thanks for ypur reply,
i did use the interrupt routine, the 2.5ms routine and it is working, i am incrementing a counter and multiplying by 2.5.
thank you..
Moran
-
hellow,
i need to measure the width of 1 squre pulse . this pulse is 50ms and about 20V amplitude ( which i have to measure ).
i am using V570 and V200, i thought using the V200 digital input and start timer , and when the pulse is at low state stop the timer.
can i do that? how?
if someone has a better idea i will be happy to hear.
thanks,
Moran
-
hi ,
thanks for your replies,
i will try your solutions,
gabriel, my square wave signal must be 24v? to the I0 of the V200?
-
Hello,
I am new in plc and visilogic and i need some help,
I need to measure the frequency of a square wave , I tried to use HSC Frequency Measurement FB , but it does not work.
( my square wave freq is slow... about 2Hz)
I connected my signal to I0 of a V200.
Can someone please tell me what should I do to measure the freq of that signal?
Do you have any example?
I am using V570 and V200-18-E2b
By the way:
My square wave should be 24v?
Thanks,
Moran.
Press a button from Ladder code
in UniLogic Software
Posted
Hi s.pratt,
thanks for your repliy , i think what you suggest is the answer for me...i will check it
thank you.