Aurelio Posted February 9, 2012 Report Share Posted February 9, 2012 I have one M91-2-R34 model, as marked on the PLC. So, I choose this model on the HW Configuration, and when I make the download to PLC, it shows the messagem "diferent type". I go to online, and get the PLC model, it shows a model M91-2-R1. Summarizing, the PLC is a M91-2-R34, but, internally, it is a M91-2-R34. I`ve tried to continue the download even after the message, but does not modify the model. Any tips? Quote Link to comment Share on other sites More sharing options...
AlexUT Posted February 9, 2012 Report Share Posted February 9, 2012 Hi, This is the case you should contact your distributor. If there is no distributor - send your request to support@unitronics.com and we will give your advice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.