drt1710 Posted February 5, 2014 Report Share Posted February 5, 2014 Hi all My daughter has come home from school with a side project that her maths teacher has given her, this project is NOT my daughter's school work, I wouldn't allow her to have someone else do her work for her. Her teacher has been told to make a program to connect to a machine, she has for the most part completed it. She sent it to the supervisor who looked it over, said that yes it does work, but please debug it and tidy it up. She has no clue how to do this. I have attached what she has done, is there a nice person out there that could help either by telling us what he means by debug and tidy up, or if anyone has a couple of minutes could they do it for us please? Thank you for reading. Duncan E96D_2Bv1009.vlp Quote Link to comment Share on other sites More sharing options...
neurocyber Posted February 7, 2014 Report Share Posted February 7, 2014 She did a nice job, you might try running the project optimizer in visilogic. The window on the bottom will point out some "tidy up help" Quote Link to comment Share on other sites More sharing options...
TozoM8 Posted February 8, 2014 Report Share Posted February 8, 2014 Like neurocyber said, the project optimizer will point out problems like a coil being called by two different net. They will not turn on because the other net will keep it open. Quote Link to comment Share on other sites More sharing options...
drt1710 Posted February 8, 2014 Author Report Share Posted February 8, 2014 She did a nice job, you might try running the project optimizer in visilogic. The window on the bottom will point out some "tidy up help" Many thanks for that, I shall pass it on Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.