Jump to content

HMI Variable Trouble

Recommended Posts

We use the V280 series PLC for controlling our panel functions. A customer has requested an "Auto Start " feature controlled differently than what we currently offer. So I copied the old subroutine, pasted it into a new subroutine, renamed it and change the Timer and Memory Bits for this purpose. I created a new HMI for the subroutine, created the Touch "ON" & "OFF" buttons, linked those to the proper Memory Bits, created a Binary Text box and linked the variable to the proper Memory Bit.

My problem is the Binary Text Box is not changing state. I have used the "Online Test" feature in Visilogic to watch what is going on in the subroutine and it is trying to change, but it will not locked into the "ON" state. What is going on!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...