Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by OLAF

  1. Great! Super! You have saved me hours and hours of useless typing... Thanks a lot for your speedy delivery of the solution! Olaf
  2. I have to add to an existing project a 2nd HMI language. changing the texts on the HMI on the fly. Is there a way to export all existing texts (also the alarms), translate them and to load them back into the project? I am trying to find something on the YouTube channel, but I seem to be too blind for it... Thanks in advance!
  3. Dear, We are starting up our second project with UniStream and are facing for the 2nd time problems with analog Input Cards type UIA-0800N: from 8 Cards (used in the 2 Projects) 4 are giving strange results with too low measured values: Although the cards are configured in between 0 (0 mA) to 2000 (20 mA), some of them are showing surprisingly low values like 350, when receiving a 4 mA Signal (using this loop calibrator https://www.instrumart.com/products/19584/ge-druck-ups-ii-loop-calibrator). The channels affected are also not showing the correct value for 20 mA (2000), but something
  4. Thanks a lot Alexander! Still a pity...was a nice feature to combine several output functions within one configuration. Olaf
  5. I have been using under Visilogic the feature to "Hide" and "Marking" screen buttons. Like this I could hide the button, if its function should not be active (not only disabled, but really "gone") - display it again, when its usage was alllowed and even use the "marked" button as feedback, if for example its initiated function was active. 1 button - 3 functions. In Unilogic I am now at the point to use binary image elements, but I am only managing to get one of the two functions implemented at once: hiding the button using two images (one blank images), but then without the marking
  6. Wouw! I would never have found this so fast and easily! Thanks a lot! Olaf
  7. I've tried to find a way to load a HMI screen via ladder within UniStream (which I found to be a very useful function within VisiLogic), but so far without success. Is there a way to get things done like: if a condition turns on screen n° xxx will be opened? Thanks for your feedback. Olaf
  8. OLAF

    OPC DA or OPC UA

    Thanks for your feedback. Olaf
  9. OLAF

    OPC DA or OPC UA

    Dear All, Does someone knows which protocol is implemented in the UniOPC package: UA (Unified Architecture) or DA (Data Access)? For one of our test installations we need to connect a V1040 PLC via OPC UA to a fuzzy logic controller that generates variable setpoints we need for our process. Thanks a lot. Olaf
  10. Hello, I included into the software the condition of not writing into the SD file, while the mail sending is in progress. Still: the same problems occurs: two files are attached, an empty file with the name of the SD file (size on the SD card is about 450 kb) the Attachment validity.txt file The status integer of sending the mail is 521, a number that is not explained in the help file of the VisiLogic software. For the hack, I have changed the value in SI58 from 10 to 1000 and the following mail left correctly, with the SD card file attached to it. I could only try it once and will send
  11. Thanks for your quick feedback Alex. It is indeed possible that I am writing into the file when being send! I have not been taken care for this. I will make a test on site and will post the result. Olaf
  12. Dear all, I have a strange problem with sending out txt files from an SD card (vision 1040, connection via ethernet to SMTP server): We are writing data into a txt file on an SD card that should then be send out once per week (day....) by mail. This is in principle working fine, has been tested and found to be working. We still get the mails, but with two attachments: the txt file that should be send is empty an extra txt file called "Attachment Validity.txt" is attached with the following content "1) WEEK.txt X ", where WEEK.txt is the name of the original txt file. The file size i
  13. Dear all, I have a strange problem when trying to import txt files generated by a V1040. It is clearly not related to Visilogic, but maybe someone has faced and solved already the same phenomena and can help me now? I am generating a comma separated file (see attached CSV_FILE.jpg) with the create delimited line function. The file containes data logs of an installation that should be send by mail on a daily basis. The send file should be imported into an MS ACCESS database for all the necessary data evaluation and manipulation. (Each new data is added within access to a table with all previo
  14. We are having some V280 PLC's in use that are logging data into a table. For the follow up of these units it would be easier to receive the logged data once per day attached to an e-mail. I know how to do this with the enhanced controllers (via SD card files), but is there also a way to send complete data tables out by mail? Thanks for a short feedback. Olaf
  15. Just a short info about the status: since the update of the OS there are no freezes anymore. So: good news. Thanks for the help Olaf
  16. Thanks for the info. I will give it a try one of the following days and will keep you informed!
  17. Uih...I hope not, since running without the card is no option.
  18. Great...my previous post was taken from another OPLC Here is the one that does difficult: OS Version: Color Vision OS - V3.4 (B0) V1040(A) O/S: 3.3 (00) BOOT: 2.2 (04) BinLib: 0-3.10(00) FACTORY BOOT: 1.3(06)
  19. Ah...OK...here it is: OS Version: Color Vision OS - V3.4 (B0) V1040(A) O/S: 3.3 (20) BOOT: 2.2 (0.5) BinLib: 0-3.10(02) FACTORY BOOT: 1.3(06)
  20. I feel a bit stupid, but what do you mean with "system file versions"? OS is Win7 64 bit
  21. Dear all, I have a major problem with two of our V1040 OPLC's: from time to time the screen "freezes". The last shown screen remains active, pushbuttons (F buttons, or on screen touchfunctions) do not have any function anymore. The software seems to run normal, Canbus communication is working, but the checking the Canbus network via "Communication - PC settings" is indicating two remote IO's as not reachable ?!? Using the Remote Operator version screen navigation and pushbuttons functions are all working (remotely...not on the screen directly). I am not sure, but maybe there is a link betw
  22. Hi Simon, "Another possible cause is that you are calling that screen from the ladder and using a direct logic condition rather than a 1-shot" This was it! What a beginner fault - and what freaky effect it had. Thanks a lot for your answer. Olaf
  23. Hello Simon, Thanks for your feedback. I have deleted all my displays, have only left the integers and one ASCII on the screen, have linked the refresh bit to a key, and still have the same problem. So I deleted also the last ASCII string, and now I have the funny effect that on one screen one integer is not shown. If I copy it to another screen, it is working, but not on the original screen: really strange ?!?! I have been checking with the "Display Summarize" function what may be wrong, but the feature always crashes with the message "prvShowHmiElements Automisation fault". Does this ma
  24. Hello Simon, Thanks for your detailed answer. Allow me two comments: 1) We do have a very reasonable (!) distributor for Unitronics here, but they are also distributing lots of other products. They are capabable of solving hardware issues, but are not the correct adress for software related problems. 2) I see the main advantage of such a forum in open discussions, open to everyone that may be in the same situation, even months later. I have already been spending hours in front of the old forum and found solutions in posts that were years old. Olaf P.S.: What is FWIW standing for?
  25. Hello, Not to complain, but is there a reason why upates of posts are taking so extremely long? I make a post when I am in sh*t, have then to wait almost 1 day before my own post is online, another day for the first answer....this is getting a bit tough, cause - tja - I am still in sh*t with my problem. Is there a way to make this all a bit more fluent? Thanks! Olaf
  • Create New...