[V130-T38 Connected to IO-A14-A02 How to check if Faulty or Not]

thanks for your insight @kratmel

[V130-T38 Connected to IO-A14-A02 How to check if Faulty or Not]

@kratmelthanks for your suggestion, I have checked and found under hardware it says NO I/O Expansions. Does this possibly indicate something is faulty possibly the IO module?

 

[V130-T38 Connected to IO-A14-A02 How to check if Faulty or Not]

Hi Guys

I have a V130 PLC that I can connect to remotely via VPN. The V130 connects to an EX-A2X and a IO-A14-A02

My question is, what is the simplest way to check if the IO-A14-A02 has any faults or is faulty?

I can see my analog inputs are reading correctly.

The customer said the Run light was flashing so all I can assume was it was maybe faulty?

I was hoping when online is there some way of checking the module

Thanks guys

[Addition of 2 Memory Floats]

@Joe TauserGot it!, thanks for your help.  Greatly appreciated have a great day 

[Addition of 2 Memory Floats]

Thanks Kratmel I appreciate the help so far very good

Just another quick question, where would I enter a value of 0.1 as the increment

I'm not sure how to increment by 0.1 per pulse. As I can't enter 0.1 as a preset as it only takes dec

Attached is hardware config and logic

 

[Addition of 2 Memory Floats]

Hi There

 

I need help please. I am using a V130-T38 software version 9.8.96

 I would like to add 2 memory float numbers whenever a pulse input occurs.

Each pulse represents 0.1KWh.

I am having trouble as the ADD F function block doesn't seem to add each time the pulse input occurs. Only when I go online and change the MF value, it add once then stops.

I would then like to convert the MF to integer so I can show then on the display.

Any tips on the best way of doing this. is appreciated

Thank you all