Julian L

Well thanks guys i tried connecting on a blank program and it worked, then i removed the faulty email part (I had totally forgotten about it so I did not check that out)on the main program and now everything is ok.

Still not connecting

Here it is. I'm on version 9.8.0.96 test.vlp

If you're talking about the socket parameters in the V700 i have socket 0 on 20256 as TCP slave. I tried changing the ethernet cable and it still didn't work.

This is what i have now, the cable is connected directly from the plc to the ethernet port of my computer.

Thanks but name is set to V700 because this plc was already in use and the previous guy set it to this name

Hi everyone, I'm new to the Visilogic and Unitronics environment and i'm trying to download a program on my V700 but it's only working via the serial port. I've read how to do it with the ethernet cable, it worked 2 times, then never again. This is the settings i'm working with (from what i understood we had to do) : in the V700 (named V700 in the settings): IP 192.168.1.1 Mask 255.255.255.0 GW 192.168.1.254 on socket 0 port 20256 TCP slave My ethernet driver is set to IP 192.168.1.20 Mask 255.255.255.0 GW None and when i try to communicate I set : IP 192.168.1.1 (I also tried 20 or any other value instead of the final 1 and it didn't work either) TCP 20256 V700 But the get oplc information button never returns the infos and i get the usual error message when the communication isn't occuring. Does anyone has an idea of how to solve this? Thanks