Gabriel Franco Posted March 26, 2012 Report Share Posted March 26, 2012 Can EX-RC1 have IO-LC1 or IO-LC3 attached and to be programmed to act as a single and stand-alone bulk-weighing scale controller? I have 8 scales site-distributed along factory which do not need local display, just local control; but to be monitored from control room. My idea is to have one main OPLC to monitor and distribuited control. Quote Link to comment Share on other sites More sharing options...
MVP 2014 Simon Posted March 26, 2012 MVP 2014 Report Share Posted March 26, 2012 I have helped a customer do this, it should be no great problem. Just put all the relevant operands together so it is easy to include them in the Struct for CAN read and write. Add MBs that can be remotely set and reset to activate the Tare and Calibrate functions, and so on. Quote Link to comment Share on other sites More sharing options...
Gabriel Franco Posted March 27, 2012 Author Report Share Posted March 27, 2012 Thanks Simon, I just wanted to be sure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.