Jump to content

Recommended Posts

Posted

I'm new to unilogic but not a beginner in automation, but there is a thing I can't work out.

The machine is going to sort a product to different positions.
We are counting pulses from a pulscounter on a continuous rolling convayer, and the positions are different pulses away from the measure position. 
In a table we have the values: positon, min diameter, max diameter, min lenght and max length
In another table we have: position and pulses

when the measuring is done we would like to get the position that match both diameter in range of min and max diameter and lenght in range of min and max length
and when the product reaches that position it will be pushed off the convayer.
There could be as much as 12 products at the same time on the convayer and maybe some is going to be pushed off at the same position.

I hope some of you can help me or give me a push in the right direction. Thanks!

  • 5 months later...
Posted

Hello Bluecolor,

The description you wrote down are too general.

Please let me know what kind of requirements you need for your devices. 

I need you to send the devices you are using and their specs + IG (Installation Guide).

The controller you wish to implement it one an so on...

If you would like to work over email cooresponding you can send all the inforamtion + files to support@unitronics.com and mention my Name over there so I will continue handling you ticket.

Looking forward for your reply.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

This site uses cookies. By clicking I accept, you agree to their use.