Mikel Posted July 24, 2020 Report Share Posted July 24, 2020 Hi all I have ultrasonic flow meters with 4-20ma outputs installed on the discharge pipe of series of pumps one of which has a flowrate of 0.4 - 2.0 m3/h. I have done the linearization and have the flowrate displayed on the HMI. I'm faced with the challenge of calculating the total flow and displaying on the HMI as well in m3. Any assistance will be highly appreciated. I'm using vision 1210 Thanking you guys in advance. Mike. Quote Link to comment Share on other sites More sharing options...
MVP 2021 Ausman Posted July 24, 2020 MVP 2021 Report Share Posted July 24, 2020 Have a look at this. Cheers, Aus http://forum.unitronics.com/topic/5271-totalize-flow/?do=findComment&comment=20226 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.