ZK0 Posted August 10, 2022 Report Share Posted August 10, 2022 Currently working on a project that involves interfacing a V1210 with an EX-RC1 as part of a CANBUS network. The -RC1 has some timers on it which I would like to be able to configure from the V1210, but just noticed that the -RC1 does not have the option to "Store Timer Preset" from the Store dropdown menu. Am I SOL in this aspect? Quote Link to comment Share on other sites More sharing options...
MVP 2023 kratmel Posted August 10, 2022 MVP 2023 Report Share Posted August 10, 2022 Once again I saw something that I didn't know about the Visilogic 😎. The ladder capabilities in this module are really limited. If it is necessary to have a configured timer in this module, it can certainly be implemented as a counter that counts pulses from SB3, SB7. The registers of the set point and the current value can be both read and written remotely. Quote Link to comment Share on other sites More sharing options...
ZK0 Posted August 11, 2022 Author Report Share Posted August 11, 2022 That's exactly what I needed, thank you so much! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.