ORSO2001 Posted February 16 Report Share Posted February 16 hi All, i am having a strange issue with the password text box with release 1.35.227 in a specific project. As many of the UNILOGIC users I have my own basic UDFB and HMI modules like users management, alarms, debug, etc etc. so I am creating a new project using these basic modules and I discover that the password box doesn't have any effect with the variable coupled with it...this happens in each HMI screen (not just in one) where I put this element; if I use the simple text box all works fine so I think that nothing is wrong somewhere in the program...the strange thing for me is that if I create a new project with the same basic modules the password box back to works properly...so is something with the specific project...I already try rebuilt it many time; upload again the firmware 1.35, upload different project an upload back this one...nothing works...this project has this problem. any suggestion about what to do before ask an help from the support?... Quote Link to comment Share on other sites More sharing options...
Rivka Posted February 18 Report Share Posted February 18 Hello. If your project is corrupted, as it seems to be, I would go for the support solution right away. It is possible someone from R&D will fix it easily. Have a good day! Rivka 1 Quote Link to comment Share on other sites More sharing options...
ORSO2001 Posted February 18 Author Report Share Posted February 18 hi Rivka, ya...ticket created and sen to support. thanks Quote Link to comment Share on other sites More sharing options...
Saragani Posted February 18 Report Share Posted February 18 Hi @ORSO2001 Thanks. I hope that your ticket has the project and also all the information (screen captures, or videos, or anything that can help R&D understand what is not working properly) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.