Henryz Posted July 1, 2019 Report Share Posted July 1, 2019 I bought one unit of V430 for our DEMO..... no doubt the unit is more than 2 years but we hardly power up; Today when we power up, surprisingly to find out the Touch Screen not responding at all We reload the program and again not responding No error warning Anyone face the similar issue?? Quote Link to comment Share on other sites More sharing options...
Isakovic Posted July 1, 2019 Report Share Posted July 1, 2019 Can you go into info mode? Quote Link to comment Share on other sites More sharing options...
MVP 2022 Ausman Posted July 1, 2019 MVP 2022 Report Share Posted July 1, 2019 Isak has just replied but here is mine anyway. Hi Henry, have you read through the pinned topic Vision Bricked? and tried the methods therein? cheers, Aus And also checked the battery? Quote Link to comment Share on other sites More sharing options...
DanT Posted July 2, 2019 Report Share Posted July 2, 2019 Hi; Since it Powers up , Use VisiLogic - Blank program will do - and get into it via the USB Port. Go to ON line Mode, and look at SI 40 and 40 - these are the X and Y positions when the Touch Screen is touched. -1, -1 are no touch, and when touched, the position is given Also SB16 -- Touch Screen is Active What state is SB 17 in?? DanT Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.