Jump to content

PLC flag on Remote Operator connection


Recommended Posts


I have a Samba PLC application, and have for the first time connected remotely to a Unitronics PLC via Remote Operator to demonstrate the functionality.  I received a request to have a status flag or icon of some sort on the HMI screen to notify the local machine operator that there was an active Remote Operator connection.   

I looked in the System Bits but didn't seen anything that directly addressed this; similarly  didn't see anything in the help files unless I'm just looking in the wrong spot because I don't know what to call it. 


thank you, 



Link to comment
Share on other sites

  • 1 year later...
  • MVP 2021
1 hour ago, ray said:

SB148 not work on V700. Any ideas for the V700? 

The V700 has equivalents to all the Ethernet System Bits. In this case Socket Status Request #22 would return the value of 23. Go to the help file and read the topic "Vision700 - Using Ethernet".

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...