Mac9010

Hello, I am trying to extract a screenshots and data tables from a USP-104-B10, but the USB isn´t recognized. I know that the USB has a specific format FAT32 and I connected a USB with this format but I couldn't extract the files. Thanks in advance.

HI Joe. Thanks for your help! I have a question, What is the largest number that can be used in the letter "B"? And I understand that the shift source could be a Input of the PLC, but the shift out bit, what kind of value could be ? Thanks in advance

Hi everyone I am looking for some information about "shift rigth" in the unilogic software, but I couldn't found anything. I am trying to do a program with the function "shift right " I made it in a PLC JAZZ but now we need to use a PLC unilogic USP- B10 The aplication is the next I have a machine that has a camera, and it takes a photo about a "code" if the code is correct the camera send a signal "ok" or 1. to my PLC. and now when the camera send a signal bad or "0" , and now i would like to make the next. final discard camera bit 1 1 1 1 1 1 1 0 1 camera bit 1 1 1 1 1 1 1 1 0 when the signal goes to cero in a specific point of the machine , i want to activate a signal to discard the product that didn't have the correct code. Someone could help me with this?? or could explain to me, how to can I use the shift rigth, or helpme with some information. Thanks in advance.

Hi everyone I hope that someone can help me During a validation of one our PLC unilogic, I pressed a button with the tag " run as a display" then the system reeboot and shows the followings screens. And I couldn´t return to my PLC program. The button return to USP is disable and I try to reset the PLC, recharge the firmware but continuos in the same situation Help me. Thanks in advance.

Kratmel and DanT. Thank you for your recommendations Have a nice week. 🖐️

Good day everyone! I have a little project and I would like to use a Samba 4.3 PLC, but I don´t know if it has I/O modules extra. I need around 25 Inputs and 15 outputs. I hope that you can help me! Thanks in advance.

Thanks a lot Joe T. I check the examples project but i couldn't understand how to use Convert MI to MB function. Could you help me with this?

hi everyone! I am trying to do a program with the function "shift register" Mi problem is the next I have a machine that has a camera, and it takes a photo about a "code" if the code is correct the camera send a signal "ok" or 1. to my PLC. and now when the camera send a signal bad or "0" , and now i would like to make the next. final discard camera bit 1 1 1 1 1 1 1 0 1 camera bit 1 1 1 1 1 1 1 1 0 when the signal goes to cero in a specific point of the machine , i want to activate a signal to discard the product that didn't has the correct code. Someone could help me with this?? or could explain to me, how to can I use the shift registrer. thanks in advance,.

Buen dia. Tengo un problema con unas tablas de datos, un compañero coloco un password y se olvido de cual es, y ahora me es imposible, acceder a las tablas. Podria alguien ayudarme a solucionar esta situacion o si hay algun modo de poder acceder sin el password.

Hi everyone, thanks for your advices. I solved the problem, I change the battery. The battery didn't voltage .

Hello everyone I have a problem with a program, the situation is the next, When there is a sudden power outage my plc shuts down but when it is reset it does not retain the setpoint values that were previously loaded. I have already checked if the values are retained and indeed if they are retained Cold you give some advice or tell me what can I do to solve this issue? the cpu is USP-070-B10/B and the software is the next. Thanks in advance.

Hi! Yes I already tried with the administrator permissions but it still does not open.

Thanks for your coments i AM going to check this.

Hello, I would like to know if there is a way to pass data from an excel table to a store string. to later send it to a raw data and send that data to print. for example I have a row with the following data 25 sterilization and the date. I want to send this data to print separately, is it possible? Thanks in advance

Hi there. I have a problem with a data table. I adquire the values of some variables in real time (presure and temperature) . and those are saving in a data table to after going to be printed. But sometimes my program save the last parameter with another "time" Example is the here the las rung has a diferent time. the time should be 3 minutes after of the last rung. It is a no repetible o predictible problem... sometimes it ocurrs and here is a correct data table. i am programming with unilogic 1.29. I hope that someone could help me with this issue. thanks in advance.