arnie Posted October 18, 2014 Report Share Posted October 18, 2014 In my fruitless search for an affordable, decent looking HMI housing for the V1210. I decided to build my own. Pictures attached. The housing was built with the idea of being able to mount the screen to an extendable articulating arm, and potentially mounting two V1210's side by side. Let me know what you guys think. The inner/smaller square frame will allow for sturdy mounting of the screen/housing using both or one axis. There may already be something on the market that can do this, but I'm not aware of any. -Arnie 1 Link to comment Share on other sites More sharing options...
Eyal Koren Posted October 19, 2014 Report Share Posted October 19, 2014 Nice Work! 1 Link to comment Share on other sites More sharing options...
TozoM8 Posted October 20, 2014 Report Share Posted October 20, 2014 80/20 makes everything possible. Link to comment Share on other sites More sharing options...
sgull Posted October 20, 2014 Report Share Posted October 20, 2014 Hi Arnie RITTAL do a range of of panels for holding HMI's. They are decent looking but not sure if they fit into the affordable category. https://stevenengineering.com/tech_support/PDFs/71HMI.pdf Regards Denis 1 Link to comment Share on other sites More sharing options...
navigatoru Posted December 24, 2014 Report Share Posted December 24, 2014 Hi Arnie, Do you have any drawings on how to do the housing ? I would like to build one for myself as I looked after a housing on market and I did not find any decent one. Please could you post them here, or send my email to marcus.bratu@gmail.com? Thanks, and appreciate your help, Marius Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now