Could I re-order SI250

[darknesspic]

Dear All

I using V280, in HMI when I put the variable(key entry) on the HMI, the SI250 will automatically numbering. So, do I want to re-order SI250 again?

Thank you

[Flex727]

What are you trying to do with SI 250?

[darknesspic]

When I place the key entry on the HMI and then 

(First time)First variable(variable10) would be SI250=0

(Second time)Second(variable11) variable would be SI250=1

(Third time)Third(variable12)  variable would be SI250=2

...something like that

But I want to re-order the variable again to 

(variable12) going to be  SI250=0

(variable10) going to be  SI250=1

(variable11) going to be  SI250=2

Is it possible? Please advise.

[Vidmas30]

Hi, Darknesspic,

 Try to delete them from HMI and place back in order you need.

 

[AlexUT]

Hi,

You can re-arrange keypad-entry variables. Use "Variables Tab Order"

Change variables order as you need.

Is this what you need?

 

[darknesspic]

On 7/9/2017 at 1:53 PM, Vidmas30 said:

Hi, Darknesspic,

 Try to delete them from HMI and place back in order you need.

 

^^Yes I use this way at the time, thank you.

On 7/9/2017 at 2:03 PM, AlexUT said:

Hi,

You can re-arrange keypad-entry variables. Use "Variables Tab Order"

Change variables order as you need.

Is this what you need?

 

^^ My Visilogic doesn't has this feature(my visi is 9.8.31 build0), please advise

 

[Flex727]

Are you sure you have V280 selected in the Hardware Configuration?