kennadrin Posted September 11, 2023 Report Share Posted September 11, 2023 Hell everyone I am new to this forum and the unitronics platform itself. We have a v570 here that I need to check a few input/outputs on. I am willing to download the software to my laptop to do this, but wanted to check and see if there was a mode where I could do that on the HMI itself. I do have experience using other HMI and PLC's Thank you in advance Kenny Quote Link to comment Share on other sites More sharing options...
MVP 2023 kratmel Posted September 11, 2023 MVP 2023 Report Share Posted September 11, 2023 Please read about Unitronics Vision Info mode. Tap on screen >5s. Enter password 1111. Find Operand - Inputs (I) and Outputs (O) table can be selected. Quote Link to comment Share on other sites More sharing options...
MVP 2023 Flex727 Posted September 11, 2023 MVP 2023 Report Share Posted September 11, 2023 48 minutes ago, kratmel said: Tap on screen >5s Touch & hold, not tap. Quote Link to comment Share on other sites More sharing options...
kvlada Posted February 28 Report Share Posted February 28 A good thing about Vision and Jazz PLCs is that software doesn't verify if the ladder in your program is the same as the ladder in the PLC. So you can open a blank application, connect to the PLC in Online Mode, and view inputs, outputs, bits, timers, etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.