lijp99 Posted March 27 Report Share Posted March 27 When adding a new modbus operation, i.e., a "Registers Periodic", at the end of the row, there is a "Status" to be add for monitoring individual operation. When link a tag to the status filed to contain the Modbus transaction status, I can get a "-2" to show on my HMI screen. When I look at the Help page, the table for status codes is not shown correctly. Would you please help to show the complete content of this table. Thanks! Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted March 28 MVP 2023 Report Share Posted March 28 I ran into that bug in the Help, too. I was told it will be fixed in the next release, but here's the repaired table: Joe T. Link to comment Share on other sites More sharing options...
Rivka Posted March 28 Report Share Posted March 28 Hi @Cara Bereck Levy, Your attention on that point please. Thanks! Rivka Link to comment Share on other sites More sharing options...
Cara Bereck Levy Posted March 28 Report Share Posted March 28 @Joe Tauser Thank you for posting the full table--and thank you again for your orginal alert regarding that bug 🙂 It has indeed been repaired, and will be released with the fix with the next Unilogic version! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now