José Antonio Posted March 3, 2017 Report Share Posted March 3, 2017 Hi! We have a Unitronics V350 with ethernet card and I want to communicate with a Productivity of the Red lion brand via modbus TCP / IP. Unitronics is a slave and PTV is a master. I am using a socket 2 TCP 502. In crimson 3.0 I discharged the modbus TCP / IP Master in protocol 1 for which it adds a device (Unitronics) using port 502. How can I display in the crimson the variables from Unitronics to PTV ? Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted March 3, 2017 MVP 2023 Report Share Posted March 3, 2017 Would you post some links to the Red Lion products you are using? I have no problem looking through other vendors manuals, but don't ask us to go find it. Joe T. 1 Link to comment Share on other sites More sharing options...
MVP 2023 Flex727 Posted March 4, 2017 MVP 2023 Report Share Posted March 4, 2017 Just in case you're asking about addressing the V350 and not how to implement in the Red Lion, you can find the slave addressing table in the VisiLogic Help file by going to the Contents tab, then expand Communications, then Communications FBs, then expand MODBUS. There you'll find the topic "Slave Addressing". Link to comment Share on other sites More sharing options...
a062549 Posted March 5, 2017 Report Share Posted March 5, 2017 I have a lot of the DSPLE's running in my place of business. So please define what your wanting to display? Tags from the DSPLE or the tags your sending it?? The forum has been very helpful getting me going with my first Unitronics project Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now