andrew39 Posted December 9, 2016 Report Share Posted December 9, 2016 hello everyone, i got conductivity sensor TetraCon 325, which i connected to monitor LF 296 and its showing some values. I need to connect sensor to PLC modules and show data on PLC screen (V1210). Link to comment Share on other sites More sharing options...
andrew39 Posted December 9, 2016 Author Report Share Posted December 9, 2016 i cant upload picture of rear view monitor LF 296 beacuse its too big,thats how it looks: http://www.wtw.com/de/produkte/produktklassen/stationaere-messsysteme/analoge-umformer/quadroliner-lf-296.html Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted December 16, 2016 MVP 2023 Report Share Posted December 16, 2016 Have you drawn a schematic of what you've done so far? Which I/O module do you have for your V1210? Joe T. 1 1 Link to comment Share on other sites More sharing options...
andrew39 Posted January 12, 2017 Author Report Share Posted January 12, 2017 Here are the complete electrical schematics : http://www116.zippyshare.com/v/zmAasaSO/file.html This is made for laboratory exercises in fluid mechanics and i need to add one more conductivity sensor. Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted January 13, 2017 MVP 2023 Report Share Posted January 13, 2017 My MalwareBytes doesn't like zippyshare. Can you upload a pdf? Joe T. Link to comment Share on other sites More sharing options...
andrew39 Posted January 13, 2017 Author Report Share Posted January 13, 2017 You are only allowed to upload 10.24kb. OK Link to comment Share on other sites More sharing options...
andrew39 Posted January 13, 2017 Author Report Share Posted January 13, 2017 I'm only allowed to upload 10.24kb. My pdf file have 381kb. Is there any other way to upload files? Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted January 13, 2017 MVP 2023 Report Share Posted January 13, 2017 Email it to me and I'll upload it for everyone to see - joe@jtauser.com. Joe T. 1 Link to comment Share on other sites More sharing options...
MVP 2023 Flex727 Posted January 13, 2017 MVP 2023 Report Share Posted January 13, 2017 andrew39, have you uploaded files on this forum previously? If so, the upload limit is cumulative. Go and delete the files you previously uploaded and your upload limit will increase. 2 Link to comment Share on other sites More sharing options...
andrew39 Posted January 16, 2017 Author Report Share Posted January 16, 2017 @Joe Tauser please check your Email, I sent you a pdf with shematics. @Flex727 yes i did, thank you for info. Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted January 16, 2017 MVP 2023 Report Share Posted January 16, 2017 Here are Andrew's schematics- On to the question. The TetraCon 325 is the actual conductivity sensor, which must be connected to a conditioner/amplifer. You have mentioned a WTW LF96 for this. Clicking the English flag for the link you posted reports that particular item is not available, so we'll move on. Page 4 of your schematic shows the analog inputs, which you currently have as two wire loop powered sensors. If whatever conductivity amplifier you choose has an analog output, it is most likely powered by the amplifier. So you connect the + of the analog output to AN4 and the - to COM on the module. Joe T. electro schematics.1.pdf Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now