curtharrington1 Posted July 8, 2021 Report Share Posted July 8, 2021 Hello, I would like to monitor the System IO Bus Status and display a text list on the hmi, does anyone know where I can find the list of status codes? Link to comment Share on other sites More sharing options...
Rivka Posted July 14, 2021 Report Share Posted July 14, 2021 Hi, Here are the statuses. @Cara Bereck Levy, I could not find those statuses in help, but I might be mistaken. 0 = OK 1 = Not connected 2 = inconsistent number of connected IOs 3 = configuration mismatch (wrong IO types detected 4 = network error Link to comment Share on other sites More sharing options...
curtharrington1 Posted July 14, 2021 Author Report Share Posted July 14, 2021 Thank you for the info, do you know what drives the Inconsistent Number of Connected IO? It seems like that code would fall under the Config Mismatch code. Link to comment Share on other sites More sharing options...
Rivka Posted July 15, 2021 Report Share Posted July 15, 2021 You're right, we can qualify both codes as "configuration mismatch". But one is because the IO number is wrong and the other because IO types don't match. Link to comment Share on other sites More sharing options...
Kojekude Posted April 19, 2023 Report Share Posted April 19, 2023 I need a help. What does it mean? Link to comment Share on other sites More sharing options...
Kojekude Posted April 19, 2023 Report Share Posted April 19, 2023 More pictures Link to comment Share on other sites More sharing options...
curtharrington1 Posted April 19, 2023 Author Report Share Posted April 19, 2023 1 hour ago, Kojekude said: More pictures It looks like you're IO bus isn't detecting any units. Try reseating the CPU Link to comment Share on other sites More sharing options...
Kojekude Posted April 19, 2023 Report Share Posted April 19, 2023 Thnx. Definitely, last card is dead (W1616T). After 14months, and without active inputs and outputs. Propertly suplied with 24VDC etc... The door of box sometimes was open, and there is sometimes wet air, maybe it is reason for failure... I tried remotely to detect problem. Pictures wasnt clear, I couldnt see that power lamp on that card wasnt green (see the picture). It was strange, IO bus monitor status was 5, Connected Units Register was 7,7,10,255,255,... Number of Connected Units was 3, and after reset changed to 0, but Connected Units Register was the same: 7,7,10,255... I tried Configuration without that (4.) card (still connected), but without result. After all, I went to factory and tried configuration without that card (I removed card) and it was ok. After that, I replaced the card. Sorry for my bad english. Link to comment Share on other sites More sharing options...
Rivka Posted April 20, 2023 Report Share Posted April 20, 2023 Hi @Kojekude, Happy to hear that your issue was somehow resolved. This post will help us fill a blank in the help as status 5 was added later in order to help understanding exactly your kind of issue: status 5 means "one of the IOs is faulty". But obviously, if it does not appear in the help, it will not help anybody... @Shraga, could you please explain to @Cara Bereck Levy the addition of this error code and the way to have complementary informations on the nature of the faulty IO so she can add it to the help? Thanks, Rivka 1 Link to comment Share on other sites More sharing options...
Rivka Posted April 24, 2023 Report Share Posted April 24, 2023 Hi, After consulting, code 5 actually points out to an IO that is electrically connected, but which software is malfunctionning. But in fact, this situation should have created a pop up listing all the connected IOs and you should have seen that the last one was missing. Was it the case for you, @Kojekude? Regards, Rivka Link to comment Share on other sites More sharing options...
Kojekude Posted April 27, 2023 Report Share Posted April 27, 2023 Yes Link to comment Share on other sites More sharing options...
Rivka Posted April 30, 2023 Report Share Posted April 30, 2023 ok, great, so that means that the new error code was useful even though it was not documented. I'll talk to the relevant person so it will be added to the help. Have a good day, Rivka Link to comment Share on other sites More sharing options...
xXJEQTXx Posted June 9, 2023 Report Share Posted June 9, 2023 Hello everyone, i´m new to Unitronics equipment, excuse me if the solution is obvious but i can´t see it, i have this error in UIS-WCB1 module, panel USP-104-x10, i appreciate your contributions. Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted June 9, 2023 MVP 2023 Report Share Posted June 9, 2023 It looks like you have two modules. Did you define two modules in your program? Try swapping their positions and see if the error follows. Joe T. Link to comment Share on other sites More sharing options...
xXJEQTXx Posted June 9, 2023 Report Share Posted June 9, 2023 Thanks, have a nice day Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now