Egyed Károly Posted July 12, 2023 Report Share Posted July 12, 2023 Hi, We have the title hardver configuration. Last time there was a problem -> see the attached file, practically the screen disappeared. What can we do ? Why is it happened ? What is the reason ? BR Charlie Link to comment Share on other sites More sharing options...
MVP 2023 kratmel Posted July 12, 2023 MVP 2023 Report Share Posted July 12, 2023 Remove the protective film from the screen. The touch sensor seems to be triggered by dirt. If there is no result, the touch screen of the PLC is damaged. P.S. Sometimes, during installation in the door, the fasteners of the PLC are tightened too much and this causes deformation of the touch sensor. You can try to loosen the PLC mounting a little. Link to comment Share on other sites More sharing options...
Egyed Károly Posted July 12, 2023 Author Report Share Posted July 12, 2023 Thank you. We have already removed the protective film from the screen, but only after the problem. Can it be this problem because of the wrong PLC program ? Link to comment Share on other sites More sharing options...
Egyed Károly Posted July 12, 2023 Author Report Share Posted July 12, 2023 Is it a problem/can it be problem, if we use V200 26,6 V DC and not 24 V DC ? Link to comment Share on other sites More sharing options...
MVP 2023 Flex727 Posted July 12, 2023 MVP 2023 Report Share Posted July 12, 2023 Did you try pressing the yellow button in the upper right, labeled "ESC"? In my projects I disable the INFO Mode screen, but some programmers don't. If an operator leaves their finger on the screen after touching a button or pointing at something, the PLC will go into INFO Mode, as you see there. Pressing ESC will return you to the program. 1 Link to comment Share on other sites More sharing options...
Egyed Károly Posted July 13, 2023 Author Report Share Posted July 13, 2023 Thank you very much. And what about 26,6 V ? Link to comment Share on other sites More sharing options...
Egyed Károly Posted July 13, 2023 Author Report Share Posted July 13, 2023 How can I disable the INFO Mode screen ? Link to comment Share on other sites More sharing options...
MVP 2023 Flex727 Posted July 13, 2023 MVP 2023 Report Share Posted July 13, 2023 2 hours ago, Egyed Károly said: How can I disable the INFO Mode screen ? Set SI 50 to 0. 1 Link to comment Share on other sites More sharing options...
External Moderators Nacho Posted July 13, 2023 External Moderators Report Share Posted July 13, 2023 ... or put more time in SI50 1 Link to comment Share on other sites More sharing options...
MVP 2023 Joe Tauser Posted July 13, 2023 MVP 2023 Report Share Posted July 13, 2023 17 hours ago, Egyed Károly said: And what about 26,6 V ? From the V700 User Guide - Joe T. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now