AlexUT

Look at Unitronics Helpdesk artille: Vision PLC battery change without losing data https://support.unitronics.com/index.php?/selfhelp/view-article/vision-plc-battery-change-without-losing-data

1. Project is not erased. 2. Reset equivalent to power cycle. 3. Initialize & Reset clean ALL memory registers and make Reset. *&Data Tables are not affected by Reset, nor by Initialize & Reset. You can find all this information in Help file. B.R.

To be able establish connection from PC to PLC: 1. It is recommended to initialize all 4 sockets to default values, as in Help. 2. PLC Socket 1 TCP/Sever(Slave) Port 20256. 3. Connect from VisiLogic to PLC IP Port 20256. When online, or download, port status should be "Connected" and PCOM.

Hi, Set SB 168 as follows: Make Init for all 4 sockets to default port numbers. *Check in INFO mode sockets settings and port numbers. B.R.

Ausman, TCW122B-RR looks like a device for garage - isn't it? The other one is not realized yet. So, both are not for industry use... B.R.

Hisanyc, Review Unitronics Helpdesk Articke: Calculate Total - Totalizing Hope this is what you need. B.R.

Unitronics Analog Inputs are sinking and use 0V as common. Sensor you refer require external power, so it is sinking as well. To connect to Unitronics Analog Inputs, you have to use special adapter/transmitter/current loop repeater. May be Forum Members used such devices in projects. B.R.

No, it is not Cinterion. It is completely new with a lot of features. B.R.

Hi, There are number of cellular modem/routers allowing to use TCP commands. Some use URL format. It depends of model. Unitronics introduced new Routers which integrated with UniStream to send/receive SMS. See "Accessories" section of Tectnical Library. B.R.

Hi, You can find answers in following post: As well, visit Unitronics Helpdesk Portal http://support.unitronics.com/ and search for "memory". You will find some information. B.R.

Hi, Please forward your request to support@unitronics.com.

Yes, Send your version request to support@unitronics.com and we will send you link to download. B.R.

Hi, Use voltage divider and analog inputs 0-10V. For buttons use digital inputs. B.R.

What was a version number of last used VisiLogic when project being loaded to PLC? You have to use this version. And communication speed should be 115200, not 9600 *If you tested 57600 - test 115200.

Hi, Please send your request to support@unitronics.com and provide more explanation for your requirement. B.R.

Good advice is to use timers. There is a wrong use of IDLE function.

Hi Colodeti, Did you modified and downloaded to PLC new project file with added IO-D16A3-RO16? System is not plug-and-play. B.R.

Ethernet Card not detected - how it will be initialized and used? SB 141 - Ethernet Card Exists Carefully inspect Ethernet Card connector and installation slot. Check this Ethernet Card at other PLC, as already recommended.

All Unitronics software and tools does not support command line options. Only GUI. B.R.

Vision PLCs has USB-A or USB-Mini interface, which can be used only for programming, or online communication with PC. Vision PLCs does not support external USB devices. You have to find NFC reader with RS232 or RS485 interface - then you canm use it with PLC. B. R.

Hi all, Q1. What is a VisiLogic version you use. - Close/kill from task manager VisiLogic process. - Run VersionSwapper and make VisiLogic registration again. *You may need to run version swapper as administrator. - Run VisiLogic as administrator and test. Does this solve problem? If problem not solved - run VisiLogic installation as Administrator and select Repair or Change. Finish and test.

AdriaanF, Did you review LoadCell example? At this time TARE and filter are realized. You receive RAW numbers for Vref and Vinp and can process data as you need. This provide much more flexibility.

EctSol, Please make initialization of all 4 sockets in Ladder. This is a good practice. And set SB 168.

Please publish your project or trend configuration part. It seems a trend configuration error. ------------------------------------------------- Por favor Publique su proyecto o parte de configuración de tendencia. . Parece un error de configuración de tendencia. B.R.

Translation: HELLO EVERYTHING: I HAVE A PORBLEM; I HAVE AN HMI V350 I HAVE TWO DISPLAYS ONE TO SEE THE TEMPERATURE VALUES AND THE OTHER WITH A GRAPHIC, THE PROBLEM I HAVE IS THAT ON THE SCREEN WHERE I SEE THE TEMPERATURE VALUES IF THEY ARE CORRECT AT THE TIME OF VARIETY, BUT IN THE GRAPHIC I CANNOT SEEING THE TREND THE CURVE DOES NOT APPEAR TO ME, ALLOCATE THE VARIABLE WELL, BECAUSE BOTH THE NUMERICAL VALUE AND THE TREND OF THE GRAPHIC I PUT THE SAME MY. ANYONE KNOW WHAT MIGHT BE HAPPENING